2024 Land Pride RC3715 Series RC3715

2024 Land Pride RC3715 Series RC3715

Swipe to View More

  • Year 2024
  • Make Land Pride
  • Model RC3715 Series
2024 Land Pride RC3715 Series RC3715

2024 Land Pride RC3715 Series RC3715

2024 Land Pride RC3715 Series RC3715

Land Pride's RC3715 (RCM3715) is identical to the RC3712, simply 3 feet wider. The tire offering on the RC3715 is expanded to 4, 6, or 8 tires in 4 sizes, including our new 26" laminated tire. Deck rings are available as well as fold options that allow for narrow transport or independent control of the wings.

Features may include:

GEARBOX WARRANTY

5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.

3" CUTTING CAPACITY

These cutters offers 3" cutting capacity. See Operator's Manual for more information.

ADJUSTABLE JACK ANGLE

Helps keep park jack vertical when in use.

LED SIGNAL LIGHTS

LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.

BEVELED SKID SHOES

Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.

3/16" STUMP JUMPER

Standard 3/16" thick stump jumper material keeps damage to a minimum.

NARROW TRANSPORT

Fold options allow for narrow transport or independent control of the wings.

SLIDING CENTER SHIELD

Sliding center shield offers ease-of maintenance for slip-clutches and U-joints.

Engine

Engine Power Horsepower range: 50 - 160 hp (37.3 - 119.3 kw)
Lubrication Gear Lube 80-90W EP

Drivetrain

Driveline Input 540 & 1000 rpm: Cat. 6 with constant velocity u-joint with or without overrunning clutch | Intermediate: Category 4 with slip-clutch | Wing: Category 4 with slip-clutch or Category 5 with slip-clutch
Gearbox horsepower: 540 rpm or 1000 rpm 160 hp (119.3 kw) Divider and 130 hp (96.9 kw) Center & Wings

Wheels & Tires

Wheels 21" or 26" Laminated tires / 25.5" New foam filled tires / 25.5" New 20-ply pneumatic tires / 29" Used aircraft tires | Number of: 4 - Wheels: Two on transport axle and one on each wing axle / 6 - Wheel option: Four on transport axle and one on each wing axle / 8 - Wheel option: Four on transport axle and two on each wing axle

Operational

Operating Speed Blade tip - At 540 rpm: Center Blades = 15,268 FPM (77.6 mps) & Wing Blades = 15,000 FPM (76.2 mps) / At 1000 rpm: Center Blades = 15,578 FPM (79.1 mps) & Wing Blades = 14,620 FPM (74.3 mps)

Chassis

Hitch/Type Swivel Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch
Frame Type tongue: 5" x 3" (12.7 cm x 7.6 cm) rectangular tubing

Lights and Safety

Lighting Signal: LED (light-emitting diode) | 7 Pin connector: SAE J560 pin configuration

Dimensions

Dimensions Cutting capacity: 3" (7.6 cm) | Lift hydraulics: 3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers | Wing hydraulics: 2 1/2" x 12" hydraulic cylinders, hoses & fittings | Wing flex while operating: Max. 20o down, can float up as needed as long as the wheel(s) are still on the ground | Wing transport protection: Wing Transport Lock Pins | Side skirt thickness: 1/4" (6 mm) | Blades - 6 (2 per carrier): 1/2" x 4" (1.3 cm x 10.2 cm) Heat-treated, free-swinging alloy steel with uplift | Blade overlap: 6" (15.2 cm) | Stump jumper / blade holder: 3/16" (5 mm) Thick round dish shaped pan, reinforced with 1" x 4" (2.5 x 10.2 cm) blade bar | LP Performance hitch & Bar tite hitch pivot shaft diameter: 2 1/4" (5.7 cm)
Cutting Width 15’-0" (4.57 m)
Overall Width 15’-10" (4.83 m)
Transport Width with 21" tires: 10’-3" (3.12 m) (Single acting fold option) 7’-3" (2.21 m) (Dual acting fold option)
Overall Length 16'-3" (4.95 m) (With center deck raised fully up)
Deck Height 12" (30.5 cm)
Height Cutting: 1-1/2" - 16" (3.8 cm - 40.6 cm) (Varies by tire option)

Capacities

Oil capacity Gearbox: Splitter: 3.5 pints (1.66 L); Center deck & Wings: 6 pints (2.84 L)
Features Hitch jack: (7,000 lbs) (3175.1 kg)

Weights

Weight Machine Total: 4,380 lbs (1986.7 kg) / Tongue: 1,594lbs (723.0 kg)

Features

Features Skid shoes: Wing Deck: 1 Replaceable skid shoe per wing / Center Deck: 2 Replaceable skid shoes | Blade bolt: Keyed with hardened flat washer & locknut | Transport axle: Spring-cushioned on center transport axle
Construction Material, Deck thickness: 10 Gauge (3.4 mm)
Construction Material Side skirt thickness: Steel
Hub Type Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts

Product Photography