2024 Land Pride RC4710 Series RC4710

2024 Land Pride RC4710 Series RC4710

Swipe to View More

  • Year 2024
  • Make Land Pride
  • Model RC4710 Series
2024 Land Pride RC4710 Series RC4710

2024 Land Pride RC4710 Series RC4710

2024 Land Pride RC4710 Series RC4710

Land Pride's RC4710 / RCM4710 is a 10' offset version of our RC4715 Rotary Cutter.

Features may include:

GEARBOX WARRANTY

7 Year Limited Gearbox Warranty shows confidence in gearbox integrity.

4" CUTTING CAPACITY

These cutters offers 4" cutting capacity. See Operator's Manual for more information.

ADJUSTABLE JACK ANGLE

Helps keep park jack vertical when in use.

LED SIGNAL LIGHTS

LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.

BEVELED SKID SHOES

Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.

SLIDING GUARD

Easy-off shields and a patented sliding guard over the splitter gearbox make maintenance easy to perform.

DIAMOND BLADE BAR

Forged diamond blade bar provides strength where it's needed most.

SPRING CUSHIONED AXLES

Spring cushioned axles improve ride and are available options on both center and wing axles.

Engine

Engine Power Horsepower range: 55-250 hp (41-186.4 kW)
Lubrication Gearbox: Gear Lube 80-90W EP

Drivetrain

Driveline Input 540 & 1000 rpm: Cat. 6 with constant velocity u-joint with or without overrunning clutch. | Intermediate: Category 4 with slip-clutch. | Wing: Category 4 with slip-clutch or Category 5 with slip-clutch
Gearbox horsepower: 540 rpm or 1000 rpm 250 hp (186.4 kW) Divider and 210 hp (156.6 kW) Center & Wing

Wheels & Tires

Wheels 21" (53.3 cm) or 26" (66 cm) Laminated tires / 24" (61 cm) Used aircraft, foam filled tires / 25.5" (64.8 cm) 20 ply tires, foam filled or pneumatic / 29" (73.7 cm) Used aircraft tires | Number of : 5 - Wheel option: Four on transport axle and one on wing axle. / 6 - Wheel option: Four on transport axle and two on wing axle.

Operational

Operating Speed Blade tip - At 540 rpm: Center Blades & Wing Blades = 16,300 FPM (82.8 mps) / At 1000 rpm: Center Blades = 16,300 FPM (82.8 mps) & Wing Blades = 16,000 FPM (81.3 mps)

Chassis

Hitch/Type Swivel Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch.
Frame Type tongue: 5" x 3" (12.7 cm x 7.6 cm) rectangular tubing

Lights and Safety

Lighting Signal: LED / 7 Pin connector: SAE J560 pin configuration

Dimensions

Dimensions Cutting capacity: 4" (10.2 cm) | Lift hydraulics: 3" x 8" (7.6 cm x 20.3 cm) hydraulic cylinder, hoses, fittings & stroke control spacers. | Wing flex while operating: Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground. | Wing hydraulics: 2 1/2" x 12" (6.4 cm - 30.5 cm) hydraulic cylinder, hoses & fittings. | Side skirt thickness: 1/4" (6 mm) | Blades - 6 (2 per carrier): 1/2" x 4" (1.3 cm - 10.2 cm) Heat-treated, free-swinging alloy steel with uplift. | Blade overlap: 6" (15.2 cm) | Stump jumper / blade holder: 3/16" (5 mm) Thick round dish shaped pan, reinforced with 1" x 4" (2.5 x 10.2 cm) blade bar | LP Performance hitch & Bar tite hitch pivot shaft diameter: 2 1/4" (5.7 cm)
Cutting Width 10'-0" (4.57 m)
Overall Width 11'-7" (4.83 m)
Transport Width with 21" tires: 9'-1" (2.77 m) - Single-acting fold option, 7’-3" (2.21 m) - Dual-acting fold option.
Overall Length 16'-3" (4.95 m) - With center deck raised fully up.
Deck Height 12" (30.5 cm)
Height Cutting: 1-1/2" - 16" (3.8 cm - 40.6 cm) - Varies by tire option.

Capacities

Oil capacity Gearbox: Splitter: 3.5 pints (1.66 L); Center deck & Wing: 6 pints (2.84 L)
Features Hitch jack: (7,000 lbs.) (3175.1 kg)

Weights

Weight Machine - Total: 5,160 lbs (2340.5 kg) / Tongue: 1,948 lbs (883.6 kg)

Features

Features Wing transport protection: Wing Transport Lock Pin | Skid shoes: Wing Deck: 1 Replaceable skid shoe. / Weight Box: 3 Replaceable skid shoes / Center Deck: 2 Replaceable skid shoes and multiple mounting locations. | Blade bolt: Keyed with hardened flat washer & locknut. | Transport axle: Many configurations to choose from.
Construction Material, Deck thickness: 10 Gauge (3.4 mm)
Construction Material Side skirt thickness: Steel
Hub Type Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.

Product Photography