2024 Land Pride RC5710 Series RC5710

2024 Land Pride RC5710 Series RC5710

Swipe to View More

  • Year 2024
  • Make Land Pride
  • Model RC5710 Series
2024 Land Pride RC5710 Series RC5710

2024 Land Pride RC5710 Series RC5710

2024 Land Pride RC5710 Series RC5710

Land Pride's RC5710 Rotary Cutters are single wing mowers that are ideal for roadside mowing. The left-hand wing is replaced with a weight box on the RC and the right-hand wing is replaced with a weight box on the RCL models. This allows the operator to travel next to the road’s shoulder, remaining on more level ground. All the features you love from our 15-foot cutters are there too, in a 10-foot single wing model!

Features may include:

GEARBOX WARRANTY

7 Year Limited Gearbox Warranty shows confidence in gearbox integrity.

SLIDING GUARD

Easy-off shields and a patented sliding guard over the splitter gearbox make maintenance easy to perform.

PARALLEL PIVOT AXLE

Patented parallel pivot axle gives you unmatched ground contact for improved holding power on hills and inclines.

PARALLEL PIVOT AXLE

Patented parallel pivot axle gives you unmatched ground contact for improved holding power on hills and inclines.

FLIP SPACERS

Patented convenient flip spacers speed height adjustment and eliminate the need for donut-style spacers which can easily be lost.

DECK ARMOR™

Patented Deck Armor™ is an additional layer of steel which increases durability reducing the possibility of deck damage from blade to deck contact without reducing cut quality.

REPLACEABLE SIDE SKIRTS & SKID SHOES

Damaged side skirts are easily replaced. Replaceable skid shoes are full length and constructed of high-tensile AR400 steel for durability.

HOSE HOLDERS

Color coded hydraulic hose handles provide easy hose identification. Tongue-mounted hose holder keeps hose tips out of the dirt.

FULLY WELDED

Double deck wing-to-wing (10 gauge over 7 gauge), fully welded.

HITCH

Self-leveling Performance Hitch™ with holding pin reduces drawbar wear and allows for one person hook-up.

SAFETY LIGHTING

LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.

Engine

Engine Power horsepower range: 60 - 250 hp (44.7 - 186.4 kW)
Lubrication Gearbox: Gear Lube 80-90W EP

Drivetrain

Gearbox horsepower: 250 hp (186 kW) Divider and 225 hp (168 kW) Center & Wing | 540 rpm or 1000 rpm / 250 hp (186 kW) Divider and 225 hp (168 kW) Center & Wing
Driveline Input 540 & 1000 rpm: Cat. 6 with constant velocity u-joint with or without over-running clutch. | Intermediate: Category 5 with slip-clutch. | Wing: Category 4 with slip-clutch or Category 5 with slip-clutch.

Wheels & Tires

Wheels Number of: 5 - Wheel option: Four on transport axle and one on the wing axle. / 6 - Wheel option: Four on transport axle and two on the wing axle. | 21" (53.3 cm) or 26" (66 cm) Laminated tires. / 24" (61 cm) Used aircraft, foam filled tires. / 25.5" (64.8 cm) 20 ply tires, foam filled or pneumatic. / 29" (73.7 cm) Used aircraft tires.

Operational

Operating Speed Gearbox horsepower: 540 rpm or 1000 rpm | Blade tip - At 540 rpm: Center Blades & Wing Blades = 16,400 FPM (83 mps) / At 1000 rpm: Center Blades = 16,400 FPM (83 mps) & Wing Blades = 16,000 FPM (81.3 mps)

Chassis

Frame Type tongue: 5" x 3" (12.7 cm x 7.6 cm) rectangular tubing.
Hitch/Type Constant Level Swivel Clevis Hitch, LP Performance HitchTM, Self Leveling Bar-Tite Hitch, Ball Hitch, or Constant Level Pintle Hitch.

Lights and Safety

Lighting Signal: LED / Seven pin connector: SAE J560 pin configuration

Dimensions

Dimensions Cutting capacity: 5" (13 cm) | LP Performance Hitch & BarTite hitch pivot shaft diameter: 2 1/4" (5.7 cm) | Lift hydraulics: 3 1/2" x 8" hydraulic cylinder, hoses, fittings & flip-over spacers | Wing flex while operating: Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground | Wing hydraulics: 3" x 12" hydraulic cylinder, hoses & fittings. | Blades - 4 (2 per carrier): 1/2" x 4" (1.3 cm - 10.2 cm) Heat-treated, free-swinging alloy steel with uplift | Blade overlap: 6" (15.2 cm)
Cutting Width 10'-5" (3.18 m)
Overall Width 11'-11" (6.3 m)
Transport Width with 21" tires: 9'-1" (2.77 m) - Single-acting fold option, 7’-3" (2.21 m) - Dual-acting fold option
Overall Length 16'-3" (4.95 m) - With center deck raised fully up
Deck Height 12" (30.5 cm)
Height Cutting: 1-1/2" - 16" (3.8 cm - 40.6 cm)

Capacities

Oil capacity Gearbox: Splitter gearbox: 5.5 pints (2.6 L); Blade spindle gearboxes: 12.4 pints (5.87 L)
Features Hitch jack: 7,000 lbs (3175.1 kg)

Weights

Weight Machine: 5,740 lbs (2604 kg) | Tongue: 2,218 lbs (1006 kg) with the wing down. 2,302 lbs (1044 kg) with wing folded-up.

Features

Features Wing transport protection: Wing Transport Lock Pins. | Wing Deck skid shoes: One leading hardened beveled skid shoe and one trailing standard beveled skid shoe | Weight box skid shoes: One leading and one trailing hardened beveled skid shoes that are reversible/replaceable and one replaceable intermediate beveled skid shoe. | Center deck skid shoes: Two replaceable beveled skid shoes and multiple mounting locations. | Blade bolt: Keyed with hardened flat washer & locknut. | Stump jumper / blade holder options: Forged blade bar without the dish pan. / Thick 3/16" (5 mm) round dish shaped pan, reinforced with the forged blade bar. / Thick 3/16" (5 mm) round dish shaped pan, reinforced with the heavy duty blade plate. | Transport axle: Many configurations to choose from.
Construction Material, Deck thickness: Top deck plate = 10 Gauge (3.4 mm); Bottom deck plate = 3/16" (5 mm)
Construction Material Side skirt: Removable/replaceable 1/4" (6 mm) steel. | Deck ArmorTM option: 5/16" (8 mm) Steel plate
Hub Type Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.

Product Photography