2023 Landoll 7400 VT Plus Series 7450-39

2023 Landoll 7400 VT Plus Series 7450-39

Swipe to View More

  • Year 2023
  • Make Landoll
  • Model 7400 VT Plus Series
2023 Landoll 7400 VT Plus Series 7450-39

2023 Landoll 7400 VT Plus Series 7450-39

2023 Landoll 7400 VT Plus Series 7450-39

America’s Favorite Vertical Tillage Machine

Isn’t it time that excessive residue levels and cold wet spring soils be addressed in your operation" Put the 7400 VT Plus Series from Landoll to work and increase your return on investment with higher yields, a direct result of earlier planting and more uniform emergence.

Perfectly Sizes and Mixes Residue & Soil

A great deal of research went into the design of the 7400 VT Plus Series. Determining the perfect gang angle, disc blade, and spacing was addressed head-on by the engineering staff. The results are the ideal vertical tillage unit that has the ability to anchor residue, work at shallow depths, mix and blend the soil, kill weeds and level ruts from previous operations. The smooth blades stay sharp longer and handle rocks and stones better than ripple or fluted blades.

Spring or Fall? It’s Your Choice

Better return on investment is what multi-tasking is all about. The Landoll 7400 VT Plus Series offers you a true multi-tasking tool. The VT can be used in fall, spring, or in both seasons! In fall, the VT allows the decomposition process to begin by mixing just the right amount of soil with the residue. The residue is anchored down to prevent wind and water erosion during the winter months. In spring, the VT prepares the perfect seedbed. Because the VT can perform at precise working depths, it can be set to run no deeper than where the seed will be placed during planting.

Durable and Reliable

The Landoll 7400 VT Plus Series is built in true Landoll style…precision, laser cut frame components that embrace the technology of robotic welding to its fullest. Durability is built-in, not added on. Incorporation of UHMW polymer in the lift axles provides a maintenance-free feature that eliminates daily greasing. Trunnion mount bearings are used throughout the disc assemblies and are covered by a 3-year warranty. Gang angles are fixed at 10 degrees on the front and rear. Disc blades are spaced at 7” on all gangs on all sizes. The blades are 22” or 24? low concavity; blade thickness is ¼”. The self-leveling hitch and single point depth control add to the list of items that extend the reliability of the VT Plus beyond the competition. Over-sized tires on walking tandem axles carry the load and allow for precision depth control across the entire width of the machine. Pivoting gauge wheels on the front of the wings contribute to a controlled depth of the wings even at higher speeds.

Sized to Fit

The VT Plus Series is available in sizes from 13’ 10” to 49’ 9”. The units up to 33' are 3 section folding while the units from 39’ 9” to 49’ 9” feet are 5 section folding. The 3 section units transport under 17’ 11”. The 5 section machines transport at 17’ 6”. Transport heights range from 9’ 10” to 13’ 11”. Horsepower requirements for the VT Plus Series are 8-10 HP per foot.

Features may include:
  • Laser Cut, Robotically Welded Frame
  • 5 1/2” Lift Axles with Maintenance-Free Lift System
  • Walking Tandems on All Sizes
  • Slip-In Spindles
  • 320/70R x 15, 380/55R x 16.5, 410/50R x 16.5 or 265/70R x 19.5 Radial Tires (Model Dependent)
  • Self-Leveling Hitch with Hydraulic Leveling Adjustment
  • Cast Single Lip Hitch Cat. III or Cat. IV (Model Dependent)
  • Single-Point Depth Control
  • Pivoting Wing Gauge Wheels on All Models
  • 22” or 24? Disc Blades Spaced at 7” on All Models

Engine

Engine Power Requirements: 8 to 10 HP (6 to 7 kW) per Foot

Wheels & Tires

Tires, Rear Specification Center Section: (8) 265/70R x 19.5 Radial Tires| Wings: (8) 320/70R x 15 Radial Tires
Wheels Hubs Center Section: 8-Bolt

Chassis

Hitch/Type Self-Leveling with Hydraulic Adjustment | Category: Cat. III Cast Single Lip Ball Hitch

Dimensions

Transport Width 17 ft. 4 in. (5.3 m)
Transport Height 11 ft. 0 in. (3.4 m)
Width, Working Position 39 ft. 9 in. (12.1 m)
Spindle Diameter Center Section: 4 in. (102 mm) Slip-In Spindles | Wings: 3 in. (76.2 mm) Slip-In Spindles
Dimensions Front Gang Cut: 37 ft. 6 in. (11.4 m) | Blade Size: 22 in. (559 mm) x 0.25 in. (6.35 mm) / 24 in. (610 mm) x 0.25 in. (6.35 mm) / 24 in. (610 mm) x 0.25 in. (6.35 mm) Rollable | Blade Spacing - Front Gang: 7 in. (178 mm) / Rear Gang: 7 in. (178 mm) | Blade Scrapers: 5.5 in. (140 mm) Adjustable | Gang Spools - Front Gang: 5.5 in. (140 mm) Diameter - Solid Cast / Rear Gang: 5.5 in. (140 mm) Diameter, 0.25 in. (6.35 mm) Wall Weldment | Gang Angle: 10 Degree | Gang Shaft: 1.75 in. (44.5 mm) Round | Transport Lift Axles: 5.5 in. (140 mm) with UHMW Maintenance Free Pivots | Chevron Reel Specifications: 14 in. (356 mm) Diameter, 0.875 in. (22.2 mm) Rod Diameter

Weights

Weight Approximate: 37,170 lbs. (16,860 kg)

Features

Features Blade Concavity: Low Concavity | Number of Gang Bearings - Front: 18 / Rear Gang: 18 | Transport Axle Type: Walking Tandems with Greaseable Pivots | Machine Depth Control: Single Point, Front Mounted | Reel Protection: Adjustable Spring Loaded Down Pressure | Reel Bearings: C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Construction Material Blade Scraper Mount: Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm | Gang Bearings: C-Cushion Trunnion Mount with Greaseable Triple Lip Seals | Frame: Laser Cut/Matchcut Components, Robotically Welded
Knife Quantity Number of Blades - Front Gang: 66 / Number of Blades - Rear Gang: 68

Product Photography